Media Wall Installers in Florida
161 companies in 46 cities
Cities in Florida
Top Companies in Florida
Lux Electronics
Port St. Lucie, FL
The Electpros
Palm Bay, FL
TV Guy Jay
West Palm Beach, FL
Momma's Boy Maintenance
Naples, FL
Cam Con Tech TV Mounting Service
Port St. Lucie, FL
Titan TV Mounting
West Palm Beach, FL
Services in Florida
Walls in Florida homes: what to know before mounting a TV or building a media wall
Most Florida houses are built differently from homes up north: exterior walls are usually concrete block finished with stucco outside and drywall on furring strips inside, while interior partitions are typically wood or metal studs. A large share of residents also live in condos, townhomes and manufactured homes, each with its own mounting considerations.
- median year homes were built
- 1990
- median year homes were built
- built in 2000 or later
- 35.7%
- built in 2000 or later
- built before 1960
- 9.6%
- built before 1960
- single-family homes
- 61.9%
- single-family homes
- in buildings with 5+ units
- 24.5%
- in buildings with 5+ units
- mobile homes
- 7.8%
- mobile homes
Source: U.S. Census Bureau, ACS 2024 1-year (tables B25035, B25034, B25024)
Common wall types
Concrete block (CBS) exterior walls
Where: Most single-family homes; concrete masonry is used for the large majority of new Florida houses.
Mounting: Inside, drywall is usually fastened to thin wood or metal furring strips over the block, so there are no deep studs. TVs on these walls are anchored into the block itself with masonry anchors (sleeve or wedge anchors, or concrete screws) through the drywall.
Wood- or metal-stud interior walls
Where: Interior partitions in most houses and in many newer townhomes.
Mounting: Studs are typically 16 inches on center. Heavier TVs and full-motion arms should be lagged into studs; metal studs need toggle-style anchors rated for the load.
Poured concrete
Where: High-rise condo towers along the coasts.
Mounting: Requires concrete anchors and a hammer drill. Running wires inside the wall is often impossible, so surface raceways or cord covers are common. Many condo associations require approval and a contractor certificate of insurance before drilling.
Thin paneling or light framing
Where: Manufactured and mobile homes.
Mounting: Wall panels are thin and studs may be spaced wider, so the mount must hit framing, and heavy or articulating mounts may need added blocking.
Plaster on lath or masonry
Where: A small share of older homes built before 1960, for example in historic neighborhoods of Miami, Tampa and St. Augustine.
Mounting: Plaster can crack if drilled carelessly; locating framing and pre-drilling slowly matters more than on drywall.
Tips before you mount
- Concrete block walls: the mount should be anchored into the block itself, not the furring strips. Installers typically use 1/4" concrete screws (Tapcon-type) or 3/8" sleeve anchors with a hammer drill and masonry bit, placing anchors in the solid face shells and avoiding mortar joints and hollow cores where possible.
- Stud walls: studs are usually 16" on center. Lag the mount into at least two studs with 5/16" lag bolts, typically about 2.5" to 3" long; a full-motion arm puts much more leverage on the wall than a flat mount, so it should never hang on drywall anchors alone.
- Metal studs (common in condos and newer townhomes): use toggle-style anchors such as snap toggles rated for the TV and mount weight, or have the installer add wood blocking behind the drywall.
- Hiding wires: the National Electrical Code does not allow a regular TV power cord to run inside the wall. Use an in-wall rated recessed power kit, and choose low-voltage cables rated CL2 or CL3 for in-wall HDMI and speaker runs. On block walls in-wall runs are limited, so plan on a paintable surface raceway.
- Over a fireplace or on a lanai: check the TV maker's heat and humidity limits. For outdoor spaces exposed to rain and salt air, use an outdoor-rated TV and stainless-steel mount hardware, and protect connections from moisture.
- Condos: ask the association whether drilling into concrete or exterior walls needs approval, and get the installer's certificate of insurance (COI) naming the association before work day.
- Before work starts, tell the installer the wall type (block, studs or poured concrete), the TV size and weight and the mount type. These change the anchors, labor time and price.
Sources: Census Reporter, ACS 2024 1-year: Florida (B25035, B25034, B25024) · Concrete Products: Florida residential block construction · Echo Fine Properties: Southeast Florida home construction (furring strips over block). General guidance only — your installer will confirm the right method for your wall.