Media Wall Installers in Orlando

median year homes were built

1995

median year homes were built

built in 2000 or later

43.3%

built in 2000 or later

built before 1960

13.6%

built before 1960

single-family homes

40.6%

single-family homes

in buildings with 5+ units

50%

in buildings with 5+ units

mobile homes

0.4%

mobile homes

Source: U.S. Census Bureau, ACS 2024 1-year, Orlando city (tables B25035, B25034, B25024)

Common wall types

Wood-frame bungalows with plaster or old drywall

Where: College Park, Colonialtown, Delaney Park, Lake Eola Heights, Thornton Park.

Mounting: Studs and plaster vary; locate framing, pre-drill plaster and use a backer board.

Mid-century block and frame homes

Where: Milk District and Colonialtown mid-century bungalows.

Mounting: Mixed construction; test each wall and use concrete screws in block.

Downtown concrete high-rises

Where: Lake Eola area and downtown condo towers.

Mounting: Poured concrete; hammer drill and concrete anchors, surface raceways, and association approval with a COI.

Newer block-and-stucco suburban homes

Where: Southeast Orlando, Lake Nona and other newer subdivisions.

Mounting: Block exteriors and stud interiors; masonry anchors in block, lags in studs.

Tips before you mount

• College Park and Lake Eola Heights bungalows often have plaster or old drywall; find studs, pre-drill and consider a backer board for any large or articulating mount.
• Historic overlay neighborhoods can have exterior rules; interior mounting is generally fine, but check with the city before cutting into an exterior wall for cabling.
• Downtown high-rise condos near Lake Eola typically require a COI naming the association and approval before drilling the concrete; confirm elevator and work-hour rules.
• Milk District and Colonialtown mid-century homes can mix block and frame construction within one house; test each wall before choosing anchors.
• Central Florida's afternoon storms, humidity and lightning argue for surge protection and outdoor-rated displays on porches, lanais and patios.
• Older homes may have wiring that was never updated; have an electrician inspect any outlet behind a recessed power kit before opening a plaster wall.
• Wiring: use an in-wall rated power kit and CL2/CL3 cable; in plaster and block, a surface raceway or attic route is usually the cleanest approach.