Media Wall Installers in Venice

median year homes were built

1986

median year homes were built

built in 2000 or later

34.4%

built in 2000 or later

built before 1960

7.2%

built before 1960

single-family homes

49.8%

single-family homes

in buildings with 5+ units

31.2%

in buildings with 5+ units

mobile homes

11.8%

mobile homes

Source: U.S. Census Bureau, ACS 2024 5-year, Venice city (tables B25035, B25034, B25024)

Common wall types

Stucco-over-masonry and plaster in historic buildings

Where: Edgewood Historic District and Venezia Park Historic District on Venice Island.

Mounting: Thick stucco or masonry; use masonry anchors and drill carefully, and check with the city about historic-district rules before exterior work.

Block-and-stucco single-family homes

Where: Neighborhoods beyond the island and newer golf communities.

Mounting: Masonry anchors in block, lags into studs on interior partitions.

Condo walls

Where: Gulf-side and golf-community condo buildings.

Mounting: Metal studs or concrete; use toggles or concrete anchors and follow association rules.

Mid-century block ranches

Where: Neighborhoods built in the 1950s through the 1970s.

Mounting: Block walls with furring; anchor into the block.

Tips before you mount

• Historic districts on Venice Island may carry design review for exteriors; interior mounting is generally fine, but confirm with the city before cutting into exterior walls.
• Thick stucco and plaster walls are common in Northern Italian style buildings; use masonry bits and drill slowly to avoid cracking plaster.
• Loggias and covered patios face Gulf humidity and storms; use outdoor-rated TVs and stainless hardware.
• Condo communities require association approval and a COI; ask management for the contractor rules before scheduling.
• Arched openings and built-in niches limit where a mount fits; measure wall faces before choosing a TV size.
• Block-and-stucco: use 1/4" masonry screws or 3/8" sleeve anchors into solid block, avoiding mortar joints.
• Wiring: use an in-wall rated power kit and CL2/CL3 cable; in masonry a surface raceway is typically the practical choice.