Media Wall Installers in Tonawanda

median year homes were built

1955

median year homes were built

built in 2000 or later

3.6%

built in 2000 or later

built before 1960

74.2%

built before 1960

single-family homes

76.3%

single-family homes

in buildings with 5+ units

10.8%

in buildings with 5+ units

mobile homes

1%

mobile homes

Source: U.S. Census Bureau, ACS 2024 1-year, Tonawanda town (tables B25035, B25034, B25024)

Common wall types

Wood-frame walls with drywall

Where: Postwar ranches, colonials and split-levels across the Town of Tonawanda including Kenmore.

Mounting: Studs are typically 16 inches on center; lag into studs with 5/16" lags and confirm spacing with a stud finder.

Finished basement walls

Where: Basement family rooms common in Western New York and Rochester-area houses.

Mounting: Check for moisture; mount on framed furring walls rather than directly into damp block or poured concrete.

Two-family houses

Where: Two-family and double houses in the Town of Tonawanda.

Mounting: Shared walls may be fire-rated; avoid in-wall cable runs through them.

Tips before you mount

• Most houses are wood frame: lag into at least two studs with 5/16" lag bolts about 2.5" to 3" long; a full-motion arm needs more support than a fixed mount.
• Older basements in the Western New York can be damp; check before mounting on below-grade walls.
• Heavy lake-effect snow loads (the November 2022 storm dropped 77 inches at Orchard Park) stress roofs and attics, so avoid cutting framing in attic or top-floor walls when routing cable, and keep bonus-room walls free of added weight.
• Over a fireplace: check the TV maker's heat limit and measure the surround temperature while the fireplace is running; a deep mantel or tilting mount reduces heat exposure.
• Concealed wiring: NEC 400.12 does not allow a standard power cord inside the wall; use an in-wall rated power kit and CL2 or CL3 low-voltage cable, and expect plaster and masonry walls to make in-wall runs impractical.