Media Wall Installers in Nyack

median year homes were built

1964

median year homes were built

built in 2000 or later

16.3%

built in 2000 or later

built before 1960

42.2%

built before 1960

single-family homes

33.6%

single-family homes

in buildings with 5+ units

40%

in buildings with 5+ units

mobile homes

0%

mobile homes

Source: U.S. Census Bureau, ACS 2024 5-year, Nyack village (tables B25035, B25034, B25024)

Common wall types

Plaster in Victorian houses

Where: Village streets and the hillside above the Hudson, such as River Road-area Victorians.

Mounting: Plaster over lath; find studs by pilot hole, pre-drill slowly, and lag into them.

Colonial-style frame houses

Where: Older village streets.

Mounting: Studs may be irregular; use long lags and confirm stud location.

Townhouses and modern waterfront condos

Where: Newer buildings along the river.

Mounting: Often concrete and metal-stud walls; use concrete anchors and snap toggles, and expect association approval and COI requirements.

Stone and block basement walls

Where: Older houses on sloped lots.

Mounting: Hammer-drill with sleeve anchors into solid stone or block; dampness is common on hillsides.

Tips before you mount

• Houses built into the hillside above the river often have one exposed basement wall and one buried; test for moisture before building a media wall against foundation masonry.
• Waterfront condos typically require a written request and a COI before drilling, and may restrict work on concrete slabs and shared walls.
• Salt is not a concern on the tidal Hudson in the way it is on the coast, but humid summers still warrant outdoor-rated displays on covered decks.
• On plaster, locate studs with a pilot hole, then use 3 in lags for walls with deep plaster.
• Older Victorians often have chimneys in interior walls; confirm what is behind the wall before cutting for a recessed TV.
• Use CL2 or CL3 rated cable and an in-wall rated power kit for hidden runs; NEC 400.12 does not allow a standard TV cord in the wall.