Media Wall Installers in Millerton

median year homes were built

1938

median year homes were built

built in 2000 or later

2%

built in 2000 or later

built before 1960

72.3%

built before 1960

single-family homes

71.3%

single-family homes

in buildings with 5+ units

7.1%

in buildings with 5+ units

mobile homes

3.3%

mobile homes

Source: U.S. Census Bureau, ACS 2024 5-year, Millerton village (tables B25035, B25034, B25024)

Common wall types

Plaster in historic village houses

Where: Streets in the village and older farmhouses nearby, such as c. 1890 colonial farmhouses in the area.

Mounting: Plaster over lath; find studs by pilot hole and lag into them.

Farmhouse timber framing

Where: Farmhouses between Millerton and Amenia.

Mounting: Hand-cut framing may have wide, uneven spacing; probe and confirm before mounting.

Multifamily and small apartment buildings

Where: Village center buildings.

Mounting: Metal or wood stud walls; use toggles or blocking, and ask the owner first.

Newer frame construction

Where: Newer homes around the village.

Mounting: Drywall on studs at 16 in on center; lag into two studs.

Tips before you mount

• Older farmhouses may have wide stud spacing or diagonal bracing; use a long lag and confirm the stud with a pilot hole rather than relying on a typical 16 in layout.
• Rural Harlem Valley winters bring freeze-thaw cycles; porches need outdoor-rated displays and corrosion-resistant hardware.
• Stone and fieldstone foundation walls are common in older houses; anchor into solid stone only and avoid loose mortar.
• In wood-stove or fireplace rooms, maintain clearance rules before mounting a TV above the heat source.
• Broadband and cable access can vary in rural areas, so plan for a conduit or raceway that can be reused when connections change.
• Use CL2 or CL3 rated cable and an in-wall rated power kit for hidden runs, as NEC 400.12 does not permit a standard TV cord inside a wall.