Media Wall Installers in Orchard Park

median year homes were built

1977

median year homes were built

built in 2000 or later

15%

built in 2000 or later

built before 1960

27.8%

built before 1960

single-family homes

74%

single-family homes

in buildings with 5+ units

17.4%

in buildings with 5+ units

mobile homes

0.5%

mobile homes

Source: U.S. Census Bureau, ACS 2024 5-year, Orchard Park town (tables B25035, B25034, B25024)

Common wall types

Wood-frame walls with drywall

Where: Postwar ranches, colonials and split-levels across the Town of Orchard Park.

Mounting: Studs are typically 16 inches on center; lag into studs with 5/16" lags and confirm spacing with a stud finder.

Finished basement walls

Where: Basement family rooms common in Western New York and Rochester-area houses.

Mounting: Check for moisture; mount on framed furring walls rather than directly into damp block or poured concrete.

Older village houses

Where: Village of Orchard Park's older core.

Mounting: Plaster on lath is common in older houses; test with a pilot hole.

Tips before you mount

• Most houses are wood frame: lag into at least two studs with 5/16" lag bolts about 2.5" to 3" long; a full-motion arm needs more support than a fixed mount.
• Orchard Park sits in the Southtowns snow belt; keep heavy mounts off attic knee walls.
• Heavy lake-effect snow loads (the November 2022 storm dropped 77 inches at Orchard Park) stress roofs and attics, so avoid cutting framing in attic or top-floor walls when routing cable, and keep bonus-room walls free of added weight.
• Over a fireplace: check the TV maker's heat limit and measure the surround temperature while the fireplace is running; a deep mantel or tilting mount reduces heat exposure.
• Concealed wiring: NEC 400.12 does not allow a standard power cord inside the wall; use an in-wall rated power kit and CL2 or CL3 low-voltage cable, and expect plaster and masonry walls to make in-wall runs impractical.