Media Wall Installers in Clearwater

median year homes were built

1977

median year homes were built

built in 2000 or later

13.5%

built in 2000 or later

built before 1960

16.4%

built before 1960

single-family homes

42.6%

single-family homes

in buildings with 5+ units

44.6%

in buildings with 5+ units

mobile homes

6.2%

mobile homes

Source: U.S. Census Bureau, ACS 2024 1-year, Clearwater, FL (tables B25035, B25034, B25024)

Common wall types

Beachfront and Island Estates condos

Where: Clearwater Beach and Island Estates, where many units sit in FEMA flood zones.

Mounting: Concrete or block shells with drywall on furring; use hammer drill and concrete anchors, and plan surface raceways.

Concrete block ranch homes

Where: Neighborhoods inland from the beach.

Mounting: Block exterior walls with furring; anchor into block and use studs on interior partitions.

Older waterfront cottages

Where: Older neighborhoods near the water.

Mounting: Light frame or block with older finishes; verify framing.

Mobile and manufactured homes

Where: Communities in the Clearwater area.

Mounting: Thin walls and widely spaced studs; add blocking before hanging heavy TVs.

Mid-rise condos and townhomes

Where: Newer buildings across the city.

Mounting: Metal-stud partitions and masonry shells; toggles or blocking.

Tips before you mount

• Flood zones: in AE and VE flood areas, keep TVs and outlets above the likely flood level on ground floors and avoid permanent low-wall media cabinets.
• Post-storm hardware: Helene and Milton hit the area in 2024, so if your building was flooded, have walls dried and inspected before hanging a TV on repaired drywall.
• Block walls: anchor into solid block shells with 1/4 inch concrete screws and avoid mortar joints.
• Salt air: balcony TVs need outdoor-rated units, stainless hardware and sealed connections.
• Manufactured homes: find framing with a stud finder, which may be spaced wider than 16 inches, and add plywood blocking for heavy mounts.
• Hidden power: NEC 400.12 forbids concealing a standard power cord inside the wall, so use an in-wall rated kit and CL2 or CL3 cable for signal lines.