Media Wall Installers in Hudson

median year homes were built

1984

median year homes were built

built in 2000 or later

9.4%

built in 2000 or later

built before 1960

2%

built before 1960

single-family homes

62.8%

single-family homes

in buildings with 5+ units

9%

in buildings with 5+ units

mobile homes

26.5%

mobile homes

Source: U.S. Census Bureau, ACS 2024 5-year, Hudson, FL (tables B25035, B25034, B25024)

Common wall types

Block and frame ranch houses

Where: Older Hudson subdivisions from the 1960s and 1970s.

Mounting: Concrete block or wood frame with drywall; anchor into block or lag into studs, and check for water damage in repaired walls.

Manufactured and mobile homes

Where: Gulf Breeze and Hudson Hollow mobile home and RV parks, plus homes on individual lots.

Mounting: Thin paneling or drywall over light framing with widely spaced studs; add blocking before hanging heavy TVs.

Waterfront stilt and elevated homes

Where: Hudson Beach and Sea Ranch areas along the Gulf.

Mounting: Elevated wood frame; lag into studs and use stainless hardware.

Newer block homes on larger lots

Where: Newer subdivisions inland from the coast.

Mounting: Block exterior walls with furring; masonry anchors.

Small condos and duplexes

Where: Scattered near the coast.

Mounting: Light frame or block; toggles or blocking as needed.

Tips before you mount

• Flood damage: homes flooded in Idalia or Helene often have replaced drywall and insulation; locate studs carefully and avoid mounting over patched seams or suspect areas.
• Mandatory evacuation Zone A covers manufactured homes, so protect and elevate equipment off the floor and bring outdoor TVs inside before storms.
• Manufactured-home walls: use a stud finder, mount only into framing, and add plywood blocking for heavy TVs or arms.
• Block walls: use 1/4 inch concrete screws in solid shells and avoid mortar joints.
• Salt air: coastal Hudson corrodes ordinary hardware quickly; choose stainless fasteners and outdoor-rated TVs on lanais.
• Hidden power: NEC 400.12 forbids concealing a standard cord inside a wall, so use an in-wall rated kit and CL2 or CL3 cable.