Media Wall Installers in Beverly Hills

median year homes were built

1958

median year homes were built

built in 2000 or later

6.9%

built in 2000 or later

built before 1960

53.2%

built before 1960

single-family homes

39.1%

single-family homes

in buildings with 5+ units

52%

in buildings with 5+ units

mobile homes

0%

mobile homes

Source: U.S. Census Bureau, ACS 2024 5-year, Beverly Hills, CA (tables B25035, B25034, B25024)

Common wall types

Plaster over wood or masonry in Spanish Revival and Georgian estates

Where: Beverly Hills Flats, between Santa Monica and Sunset Boulevards.

Mounting: Thick plaster and masonry interiors; locate framing, and use masonry anchors or toggle bolts where there is no stud; protect finished plaster and woodwork.

Mid-century modern homes with glass walls

Where: Trousdale Estates, a 410-acre area developed mostly in the 1950s and 1960s.

Mounting: Large glass areas leave limited solid wall; mounts often go on freestanding walls, built-in cabinetry or masonry surfaces, and may need steel or blocking.

High-rise condominium units

Where: Wilshire Boulevard and Wilshire Corridor condo towers.

Mounting: Concrete and metal-stud assemblies; hammer drill and concrete anchors, and building approval with a COI.

Custom estates with built-in media rooms

Where: Larger homes in the Flats and hillside neighborhoods.

Mounting: Plan blocking, power and low-voltage conduit during construction or remodel; drywall on engineered framing.

Tips before you mount

• Historic Spanish Revival homes: avoid cutting finished plaster or ornamental trim; use a surface raceway or a path through closet or cabinetry for cables.
• Trousdale and hillside homes: large glass walls and unusual framing; confirm solid backing, use steel or blocking, and add a seismic strap for freestanding screens.
• Seismic: anchor the mount into studs or masonry, not drywall, and use a safety strap for TVs on stands or media consoles.
• Condo towers: expect strict building rules, scheduled work hours, a COI naming the association, and possible post-tension slab restrictions before drilling into concrete.
• Stucco exteriors on patios and loggias: use stainless fasteners and sealed penetrations for outdoor TVs, with shading from direct sun.
• Large TVs on plaster: spread the load with a heavy-duty wall plate that spans at least two studs, and use 5/16" lags.
• For concealed wiring, use an in-wall rated power kit and CL2/CL3 low-voltage cable; consider a dedicated conduit in remodel work.