Media Wall Installers in Santa Cruz County

Wood-frame cottages and bungalows

Where: Older neighborhoods in the city of Santa Cruz, Capitola and Soquel, including beach-area cottages near the Boardwalk.

Mounting: Interior walls are typically drywall or older plaster on studs. Locate studs first; early-century walls may have irregular spacing, so a stud finder plus a test pilot hole is safer than assuming 16 inches on center.

Rebuilt mountain homes

Where: Ben Lomond, Boulder Creek, Bonny Doon and Davenport areas rebuilt after the 2020 CZU fire.

Mounting: New construction is standard 2x4 or 2x6 framing at 16 inches on center. Lag the mount into two studs and ask the builder where blocking was added for TVs before closing walls.

Redwood-sided and post-and-beam houses

Where: Mountain communities and rural parcels in the San Lorenzo Valley and Aptos hills.

Mounting: Walls may be tongue-and-groove wood or open beam framing with limited cavity space. Use a backer board lagged into framing and plan surface-mounted wiring.

Concrete block and poured retaining or garage walls

Where: Hillside homes with lower-level rooms cut into slopes, common in Santa Cruz and Aptos.

Mounting: Anchor into solid concrete with a hammer drill and 1/4 inch concrete screws or sleeve anchors; moisture on below-grade walls means a vapor-aware furring layer is better than mounting directly to damp surfaces.

Metal-stud condos and apartments

Where: Multi-unit buildings near downtown Santa Cruz, the Westside and along Soquel Drive.

Mounting: Use snap toggles or add wood blocking behind metal studs; confirm building rules on drilling before starting.