GetMediaWall

Slat Wall Planner for Autodesk Fusion

A free add-in for Autodesk Fusion that models a slat (acoustic) panel wall to scale: felt backing per panel, evenly spaced slats, an optional opening for the TV, and a cut list you can save as CSV.

What it does

  • Panels to order (with one spare), slats per panel and the real gap when the slats are spread evenly, shown as you type.
  • A TV opening from the TV size, centre height and margin; slats are split above and below it, and the felt can be cut for a recess.
  • One body per felt panel and per slat piece in a new component, oriented for both Y-up and Z-up designs.
  • Cut list (slat pieces grouped by length, plus panels to order) saved as CSV.

Use

Design workspace > Solid > Create > Slat Wall. Enter the wall and panel sizes, optionally the TV opening, check the Result box, click OK.

How the numbers are worked out

Panels across = wall width / panel width, rounded up; rows = wall height / panel length, rounded up; slats per panel = panel width / (slat width + minimum gap), rounded down, then spread evenly. The last panel and row are trimmed to the wall. Values are typical; follow the data sheet of the panels you buy, and fix TV mounts to studs or masonry behind the panels.

To plan the whole wall in the browser, with prices, try the free Design Your Wall planner.

Privacy: the add-in collects no data and makes no network requests. Support: team@getmediawall.com. MIT licence.