GetMediaWall

TV wall wiring diagram generator

List what plugs into your TV and get a wiring diagram. It shows which HDMI port each source uses, where the soundbar or receiver connects (eARC), which devices need the HDMI 2.1 ports, when you need a switch, and the cable lengths for the wall run. The diagram is drawn with Mermaid. You can copy its code into GitHub, Notion, Obsidian or any other Mermaid-aware editor, or copy the Graphviz DOT version.

Notes

    Mermaid code

    
    

    Graphviz DOT code

    The same diagram for Graphviz: save it as wiring.dot and run dot -Tsvg wiring.dot -o wiring.svg, or paste it into any Graphviz viewer.

    
    
    

    How it decides

    • With a soundbar, every source goes into the TV and the TV sends sound to the soundbar over the eARC port. That port is kept free, so a 4-input TV takes three sources.
    • With an AV receiver, every source goes into the receiver, one HDMI cable runs to the TV, and the receiver feeds the speakers and subwoofer.
    • Sources marked * (consoles and PCs that play at 4K 120 Hz) get the TV's HDMI 2.1 ports first.
    • Cable lengths are rounded up to stock sizes (3, 6, 10, 15, 25, 35, 50 ft). Short patch leads inside the console are 3 ft.

    This is a planning aid. Port names and eARC support differ between models, so check your TV and receiver manuals. Use in-wall rated (CL2/CL3) HDMI inside walls, and never run a TV power cord in the wall. The generator is open source (MIT): github.com/getmediawall/mermaid-av-wiring. It was written with an AI assistant (Claude) and checked with unit tests. To plan the wall itself (TV height, niche, shelves), use the free media wall planner.